Pictures of assembly of the non-pressurized unit with tank.


picture of stainless steel insulated tank

1-3/4" (4cm) of foam insulation
basic frame and tank

illustration of cross members

illustration of cross members

bottom support for tubes

heater with  no tubes installed
 

side view

illustration of cross members

illustration of cross members

tube inserted into silicon band

tube almost into plastic bottom support

tube fully seated into plastic support

tube fully inserted into tank with rubber ring in place

optional: automatic fill value assembly

plug  / drain

Optional: 220V 10amp electric heating element, comes with ground fault plug.

inserted into drain hole
fully inserted

copyright 2003 ASF.